Leica stereo microscope Device information
Device name: Leica stereo microscope Device brand: Leica Device model :M205C
Technical parameter Magnification ratio :20.5:1, magnification range :7.8×-160×, resolution :525-10501p | 
|
Application of function
Leica Microsystems' stereo microscopes can observe, analyze and record two - and three-dimensional samples. Combined with clear LED lighting, high performance digital cameras and Leica Application Suite software, it provides microscopic observation, real-time photography, distance, radius, Angle and dimensional measurements. Microscopic observation, real-time photography, distance, radius, Angle and dimension measurement.
Service area
Appearance inspection failure analysis, IC Marking, Pad, Wire inspection, IC foot spacing and other key dimensions measurement, PCB, connector and LCD display measurement.
Precision LCR tester Device information Equipment name: Precision LCR tester Equipment brand :Keysight (Keysight) Equipment model:E4980A |  |
Technical parameter
Parameters: Frequency 20 Hz to 2 MHz, accuracy 0.05%, measurement range 4 mΩ to 174 MΩ.
Dc bias :1.5v, 2v has seven-digit resolution in each range (loss factor resolution is 1ppm).
Application of function
Accurate measurement of capacitance, inductance, resistance, semiconductor, material and other electrical parameters.
Service area
Measurable parameters :Cp-D/Q/G/Rp, Z-dØ/Ør, Cs-D/Q/Rs, Y-Ød /Ør, Lp-D/Q/G/Rp/Rdc, RX, GB, Vc-idc Ls-D/Q/Rs/Rdc.
Static parameter test system for semiconductor discrete devices Device information
Device name: Static parameter test system for semiconductor discrete devices Equipment brand: Kelvin (Kelvin) Equipment model :3500-2KV-200A
Technical parameter Main pole voltage :200ov, control pole current :10A, main pole current :200A, minimum voltage resolution :1mV, control pole voltage :20V, minimum current resolution :100pA |  |
Application of function
Applicable to diode, transistor, MOS field effect transistor, junction field effect transistor, igbt, rectifier bridge, thyristor, optical coupler and other 13 kinds of semiconductor discrete device full static parameter test.
You can test device types and parameters.
Service area
Testable device type
● A diode.
● Transistor: Transistor (NPN type /PNP type)
● Voltage stabilized (Zener) diode: Zener
● Junction FET: J-mode FET (n channel/p channel, depletion type/enhanced type)
● POWER MOSFET (n channel/p channel)
● Three-end voltage regulator: voltage regulator (positive/negative pressure, constant pressure/variable pressure)
● Optical coupler: optical coupler (NPN /PNP type)
● Thyristor rectifier (ordinary thyristor): thyristor
● Triac (Triac): thyristor
● Insulated gate double maximum power transistor :IGBT (NPN type! / PNP type)
● A relay.
● Variable resistance: varistor
● Darlington Array: Darlington
Multimeter Device information
Device name: Multimeter Equipment brand: Agilent Device model :U3606A |  |
Technical parameter
1.5% bit, 120,000 count resolution
2.9 measurement functions and 5 mathematical functions
3.4 Measurement of Wire Low resistance
4.0.025% DC voltage accuracy
5.30V/1A or 8V/1A dual range Single output
6.0.01% + 3mV Load and line adjustment
7.OVP and OCP
8.4.8kHz square wave generator, ramp and sweep function
Application of function
Agilent U3606A multimeter | dc power supply is a 5 1/2 level digital multimeter and 30 w power supply. These two functions can be used together or separately.
Service area
The U3606A is a digital multimeter that measures DC voltage, AC voltage, AC + DC voltage, DC current, AC current, AC + DC current, two-wire resistance, four-wire resistance, capacitance, frequency, duty cycle, pulse width, etc. You can also perform audio continuity and diode tests. U3606A supports zero clearing, DB display, statistics, limit, reservation and other mathematical operations.
As a DC power supply, the U3606A can provide 30W DC output, with two optional ranges: S1 (30V/1) and S2 (8V/3A).
Dc power supply Device information Device name: DC power supply Device brand :GwinStek Device Model :GPR-1820HD Technical parameter Output voltage :0~18v, power supply change rate ≤0.01%+3mV, output current :0~20A, power supply change rate ≤0.2%+3mA, 3-digit 1/2 digit 0.5 "LED display. Application of function The device can be used as a stable voltage source or a stable current source. Service area Use with LCR detector and multimeter to provide stable bias voltage. |  |
 | X-ray nondestructive fluoroscopy tester Device information Equipment name :x - ray non - destructive fluoroscope Equipment brand:Alte Equipment model:FX100 Technical parameter Optical voltage :100k, optical current :150uA, magnification :125 times Application of function Microscopic observation real-time camera function Service area 1. BGA, CSP, flip chip inspection, PCB board welding condition 2. Short circuit, open circuit, cavity detection 3.LED, IC packaging inspection 4. Test capacitor, resistor and other components 5. Internal flaw detection of some metal devices 6. Lithium battery, electric heat pipe and precision parts flaw detection structure
|
High temperature aging test chamber Device information Device name: High temperature aging box Equipment brand: Guangbo Equipment model :GK-GW125L Technical parameter Internal dimension:500*500*500mm Temperature range: normal temperature +20 ~ 200 degrees Application of function High temperature test chamber is one of the test equipment to simulate the climate environment, which is suitable for the performance test of various products or materials under high temperature conditions. Service area Suitable for high temperature aging test of electronic components High temperature storage test Service life test Pretreatment |  |
 | Lead-free tin melting furnace Device information Equipment name: lead-free tin melting furnace Device brand :Quick Device model :Quick100-15S Technical parameter Power :600W, temperature range :100-450 degrees Celsius, working time range :0-999 hours, temperature stability :±5 degrees Celsius Application of function The sensor is used for temperature closed-loop control, zero-crossing trigger, pollution-free to the power grid. The pot body is made of special materials, resistant to corrosion, high temperature and oxidation. Service scope Mainly used for wave soldering or manual welding, smelting lead-free welding wire, for welding circuit board, printed circuit board and copper clad plate industry. Reliability analysis - Test of element's ability to be wet by tin. |
 | Hot air dewelding station Device information Equipment name: hot air welding station Equipment brand:Quick Technical parameter Working power: Maximum 320W 2.Starting power :540W Max Capacity:24L/min Hot air temperature :100-480 degrees Celsius Application of function Using the principle of breeze heating to remove tin, can quickly and cleanly disassemble and weld various packaging components. Service scope Suitable for dissolder most surface mount parts such as SOIC, QFP, PLCC, BGA etc. Can be used to shrink hoses. |
Intelligent lead-free soldering table Device information Equipment name: Intelligent lead-free soldering table Equipment brand:Quick Equipment model:Quick303D Technical parameter Temperature range :50-500 degrees Celsius Temperature stability:±2℃ | 
|
Application of function
Fast heating and temperature recovery speed, especially suitable for lead-free welding, automatic sleep and automatic shutdown function (optional), password temperature locking function, easy to manage, effectively protect the production process, automatic temperature correction function, can ensure good welding results.
Service scope
Suitable for lead-free precision welding of electronic integrated circuit, chip PCB circuit board.
Static test Device information Device name: Electrostatic tester Equipment brand:Quick Equipment model:Quick431 Technical parameter Electrostatic test range: low range 0-±1.50KV High range :0-±22.0KV(high and low range automatic switch) Test accuracy:±(10%+1) |  |
Application of function
1. Two measuring functions :a) electrostatic measurement, b) ion balance voltage measurement.
2. Two potential measurement methods :a) instantaneous value of electrostatic potential, b) peak value of electrostatic potential.
Service scope
Effectively detect the electrostatic charge of anti - static workplace equipment, face and tools.
SMD part counter Device information Equipment name :SMD Parts counter Equipment brand :Smtech (Samtech) Equipment model:CC-12 Technical parameter Counting range:-59999 - +59999 Application of function SMD part counters are used to accurately determine the amount of SMD material in tape and reel packaging, commonly known as counting machines, counting machines and tape counters. Service scope Suitable for IQC incoming inspection, inventory, material belt packaging counting, missing parts inspection. |  |
SMD semi-automatic glue machine Device information Device name :SMD semi-automatic glue machine Equipment brand:Smtech (Samtech) Equipment model:TAP880C |  |
Technical parameter
Applicable carrier band specification :12-88mm bandwidth carrier band
Machine capacity:2-15kpcs/h
Pallet size :7 inch, 13 inch, 22 inch, 24 inch plastic or paper pallet
Application of function
Text screen patch semi-automatic glue machine is a small electromechanical equipment integrating mechanical and electrical. Mature and stable structure, easy to operate.
Service scope
Applicable to the encapsulation of various SMD components.